We have a new machine and I cannot figure out how to add new contacts from the machines control panel.
Any guidance would be appreciated!
You can't do it at the Control panel,(I've been proven wrong, corrected info in later post)
you have to be in the copiers web page (CWIS)
Take the IPv4 address listed on the machine when you select Machine Status.
Go to your PC and open your web browser of choice (Internet Explorer,Firefox, Safari)
Put the IPv4 address in the address bar and it will load CWIS.
Select Address Book at the top (If prompted for login, it is probably username = admin password = 1111)
i correct Joe
its also possible from the UI screen on the machine, but that feature needs to be enabled first
on the CWIS page, goto properties, services, email settings, "address book settings"
there is a setting, create contact for admin only, change it to everyone
now you can add contacts directly from the UI and save it in the book
Fabio, Are you sure it can be done at the UI? Unless you are thinking of a different thing than I am, that only allows you to import via CSV file (From USB) or modify an existing entry.
Directions are below
It is an odd setup. When enabled via CWIS here:
You can't load people in at the UI under the address book via Machine Status > Tools >Service Settings Address book.
You can only add users by CSV file off a USB drive
You need to actually go into Email and select Device Address Book
There will then be a Create new contact icon