cancel
Showing results for 
Search instead for 
Did you mean: 
Highlighted
New Member
New Member

Xerox WorkCentrePro 123 wont network scan

I am web managing it at the moment, I am getting an error saying it could not connect to the WebCentre server and to verify my login / pass is correct. Thats when I set it to use SMB. When I set it to use FTP. It says it cant find the file repository to put the file in. However I can enter the path to the respository from a laptop and it works just fine. 

Under the file repository settings:
Name: Scanner
Protocols: SMB
Server Name: Rosanne-PC (this is where i want it to deposit)
Port 139
Shared name: Scanner
Remote Path: \\Rosanne-PC\Scanner (192.168.1.106)
Login name: (empty)
password (empty).

The printers IP is 192.168.1.25, on the network of 192.168.1.0.




What server is it talking about? Ive been trying to install the onmly thing I could find which is the CentreWare server on to this computer. It wants me to enable IIS and WWW services. Which I have, Ive been so frustrated I enabled EVERYTHING in windows features. And it keeps asking me to turn on "Basic Authentication, Digest Authentication, Request Filtering, Windows authentication. I have all of them installed. What gives??

0 Kudos
2 Replies
Highlighted
Valued Advisor
Valued Advisor

Re: Xerox WorkCentrePro 123 wont network scan

in order to locate the rosanne-pc , you need to be sure your dns settings are correct

 

also the remote path cannot start with \\

 

you need to leave this empty , because you configured already the share name...

 

If you have in your sharename extra subfolders like

 

\\rosanne-pc\scanner\dir 1\dir2

 

then the remote path would be  dir1\dir2

0 Kudos
Highlighted
Agency Analyst
Agency Analyst

Re: Xerox WorkCentrePro 123 wont network scan

When setting up a respository for a Network Scan here are my recommenedations:

 

COMPUTER/SERVER:

- Share out a Folder

- Create a "service" account for scanning

- Full Permissions for that "service" account you create on that share (NTFS and SHARE)

 

Xerox 123

- Make sure under the templates you are setting Public and not a Private

- Make sure you created the respository correctly under the Repository settings.

 

Example:

 

UNC Path of your server to your network scans: \\server1\share\netscans

 

Hostname/IP: server1

Share: share

Remote Path: netscans

 

That should help you in getting the scans to work correctly. Also, if you are using a domain account you may need to change the username a bit (EX: domain\user).

 

Hope that helps.

Thank you,
Jordan R.
Systems Analyst / Consultant
Fiery Certified Professional

If someone helped you make sure you give Kudos for their efforts! Don't forget to Select Accept as Solution if the reply resolved your issue as it will be able to help others!
0 Kudos