Another problem, but this time, it's about xerox 7225, as scan jams on the ADF while copies spend properly, scan after 2 sheets, the paper wad where codes : 305-132-00; 303-777-00; 303-347-00.
Thanks in advance for your suggestions.
Narcisse J / xerox / pointe-noire.
Scans run faster than copies through the ADF.
The only way to slow it down is to loosen the back tension on the belt, to do that you need a technician.
Thank you Joe for you suggestion;
The thing is machine can make hundreds of copies from DADF without any jam. But as long as i start to scan it blocs the on the 3-4 sheet. Do you have other suggestions.
Thanks in advance
There is no other answer.
The machine will feed the paper faster when scanning, if the paper is too light, or of a low quality in general it may cause jams.
That is what is happening in your case, so you need to have it slowed down.