we have a 4112 with fiery and trying to set up the network scanning but stuck trying to make or edit the templates
we have made templates in the web tools but they don't show up on the copier
tried to install the centreware to edit the default templates but our verson of windows 8.1 doesn't have windows authentication and hangs up the install
we have a 700 that the scanning works fine with and have made all the network setting on the 4112 match it to no avail
any ideas on what to do next
Try another web browser for the freezing issue.
The templates on the 700 can only be on the Fiery since it has no internal controller, and since the 4112 has a Fiery, then those templates will work just fine.
So in the 700 Webtools choose Export
Then save to desktop, and go to the 4112 Fiery and import them.
But if you made changes to the default repository on the 4112, you broke the connection for scan to the Fiery, if that is the case you would need to reset the 4112.
And if you are using Hostnames instead of IP addresses, the Fiery needs to have DNS set. Which is done via CWS5.
Server > Configure
Network > Protocol > TCP/IP > DNS
If you made the 4112 printer match the 700 Fiery you very much broke it.
The IP of the 4112 should be 100.100.100.101
Subnet 255.255.252.0 and Gateway 100.100.100.102
Realistically it should just be on DHCP/A at all times, unless it is hookend up on a switch, in which case the Fiery templates are not used, you would be creating the templates in CWIS, which does not exist on the 700.