cancel
Showing results for 
Search instead for 
Did you mean: 
Account Deactivated

8 Page signature layout with pressmark and barcode

Received a question via email asking how to do this layout in FFCore

Screen Shot 2016-03-10 at 8.13.34 AM.png

Labels (4)
3 Replies
Account Deactivated

Re: 8 Page signature layout

There are three aspects to this layout, the imposition, the pressmark and the barcode.

 

To enable this imposition use the following settings:

  • Rows and Columns - 2 Rows, 2 Columns
  • Cell Clustering - On
  • Row Gutters - .5"
  • Cust Marks - Trim Marks

Additionally, use the following Page Order settings

Screen Shot 2016-03-10 at 8.34.13 AM.png

 

Lastly, enable the Cell Transform Mode

Screen Shot 2016-03-10 at 8.37.56 AM.png

 

and rotate the top two page cells to implement the layout required for this imposition

Screen Shot 2016-03-10 at 8.38.16 AM.png

0 Kudos
Highlighted
Account Deactivated

Re: 8 Page signature layout

The layout also includes a solid mark on the top, right corner of the odd pages and on the top, left corner of the even pages

Screen Shot 2016-03-10 at 8.42.43 AM.png

 

This mark is added using a Solid Mark in the Pressmarks component.

Screen Shot 2016-03-10 at 8.45.10 AM.png

 

As placement is relative to the press sheet, the following placement options should be used. 

Screen Shot 2016-03-10 at 8.51.00 AM.png

The Non-Binding Edge alignment ensures that the pressmark aligns as expected.

Account Deactivated

Re: 8 Page signature layout

The barcode component is defined using the following symbology settings

Screen Shot 2016-03-10 at 9.39.18 AM.png

 

The contents of the barcode are used to enable sheet-level integrity checking. This is defined by using the following variables in the barcode data

Screen Shot 2016-03-10 at 8.55.34 AM.png

Both variables use the following settings

Screen Shot 2016-03-10 at 8.55.21 AM.png

 

 

Barcode placement and rotation is defined using the following settings

Screen Shot 2016-03-10 at 9.43.34 AM.png

 

Lastly a caption is added.

One thing to note - barcode captions reside within the barcode's Quiet Zone. Since the caption will be placed next to the barcode, the Quiet Zone must be extended to cover the expected placement of the barcode caption.

Screen Shot 2016-03-10 at 9.47.01 AM.png

 

The barcode caption is nominally placed above or below the content. To place the caption next to the content use the Offset controls.

Screen Shot 2016-03-10 at 9.47.35 AM.png