So the XMPie team found that the problem was caused by a combination of using the proxy in the internet settings control panel and by the firewall on the FreeFlow Core server blocking ports 161, 162 and 7751.
By adding an exception for the FFCore server in the internet settings control panel, and by adding exceptions for incoming connections in the firewall on the FFCore server, we found that workflow synchronisation worked correctly.
This is really a question for XMPie support. Do you have someone at XMPieyou can contact for support?
On the FFCore side there are no settings required to enable communication with uStore. Unfortunately, I do not know details about the uStore configuration.That's really a question for someone at XMPie.
I want to add Prepress wofkflow provider on XMPie uStore, using FFCore.
My FFCore was installed on a different server with the XMPie.
I'm using uStore 8.3, and FFCore 126.96.36.199 (installation file provided by XMPie)
I add the the FFCore on uStore in the system setup > prepress workflow provider.
I also can open the FFC page within the XMPie Preset Menu.
but when I want to connect a product with the prepress, it says "Synchronization completed, some of the prepress providers failed."
and there is no record to display
is there any setting that i've missed?
Solved! Go to Solution.