I have suddenly began having problems adding printers to FF Core. I get an error that says that Core is unable to make a connection to the printer and taht either the printer is not responding or the IP address in incorrect. I have checke the printers and they are on line, I can ping them from the server that is running Core and I can access the printer web interfaces from the Core PC.
There are very little configuration selections in Core so I am not sure how to troubleshoot this. I know that Core uses IPP to get the printer info and I have checked the printers and IPP in enabled.
This was working earlier and I can't think of anything that has changed recently to cause this to suddenly stop working...
Solved! Go to Solution.
Have you tried to use DNS name of the printer?
I use that on my FreeFlow printservers without any problems.
Just to close this out... It must have been some sort of network issue (maybe a router on our network) as all of a sudden, things started working again.
I am having the same problem with a new V4.0 install in our demo room.
SNMP is running on the FFPS - I can ping the FFPS using the DNS name and IP.
Any suggestions? It's tough to demo when it doesn't work. TiA
Trying to add a D110 FFPS Ver 9.0 90.B4.22B.86
Also tried a EFI Print Server connected to a 570 - Command WS vers 18.104.22.168
Both give the same error
Unable to establish connection with the printer.
Either the printer is not responding or the DNS name or IP address is invalid.
Error encountered connection to the device specified.
Verifiy your device is online and able to accept internet and network connections.
Could it be something with the license? Im using a Xerox ionternal license
I'm pre sale analyste from France and I get exactly the same difficulties.
I have reinstall FFCore on a new installation Windows 7 with MS SQL and I get the same problem.
I can connect to printers (iGen150 and DC260) with the IP address in the web browser without problem.
My colleague can connect to the same printers without problem and has the same OS and FFCore configuration.
If you have solution to that, it's welcome.
I have installed the upgrade 22.214.171.124 on two FF Core 126.96.36.199.
After reboot impossible to connect IPP Print server and Fiery.
I have reinstalled 188.8.131.52 under the 184.108.40.206 (without error message).
After reboot I have reconnect all IPP machines.
My license is always 220.127.116.11.
I think there is a bug with IPP with 18.104.22.168 version....