Thank you for your reply Michael. I have a customer who is unable to install a printer for the first time, there are no more outputs. When adding the printer everything seems to go fine, inputs the ip number, the system retrieves the printer's info and all seems fine, when clicking on the save button, nothing, it clicks but it does not add the printer. Customer will try on a different PC, but if you have seen this before I'd appreciate any info you may have.
Thank you again
The only limitation with the the trial version is that it only allows connection to two (2) Output Destinations (Save component and printers), whereas the purchase version allows unlimited connectivity. You can switch between different Output Destinations at any time, but the system will prevent you from having more than 2 devices configured at the same time.
The trial version automtically disables itself after 45 days. However, if you elect to purchase the software anytime thereafter, you do not need to reinstall the software and you will not loose any of your work. Simply upload a valid license and it will be reactivated as a fully-licensed version with all work (configuration, workflows, etc.) intact.
Are there any limitations with the 45 day trial version?
for example, not being able to add a printer and print?