I've now been upgraded to version 22.214.171.124 and the bug has been resolved. Thanks for your help.
Thank you, I will proceed by getting FFCore updated to the latest release.
I would first suggest upgrading to the latest version of FFCore: http://www.support.xerox.com/support/core/downloads/enus.html
We have released two service packs and a number of patches since the release you are using. We typically add significant new functionality in service packs.
One thing to note - the location of the sandbox will change when you upgrade.
Additionally, if you are using a service account with FFCore you will need to redo that configuration as well.
If you are still seeing issues with the latest release please let me know.
I'm encountering a bug with FreeFlow Core (version 126.96.36.199) where the automatic impostion ignores the set margin and pages extend off the edge of the sheet. I can't find any reference to this issue elsewhere on the forum.
In the below example I am imposing an item with a page size 60 x 35 mm using an imposition preset I created. The press sheet size is 320 x 450 mm with 5 mm gutters and 5 mm margins. This imposition works great most of the time, but every now and then I encounter a page size that causes a glitch. 60x 35 mm is one, so is 59 x 54 mm.
Screenshot A - Image goes off the edge of the press sheet.
Screenshot B - The row and column layout is automatic, so it should be best fit.
Sreenshot C - The margin is set to 5mm, so I wouldn't expect FFC to place any image, except bleed and trim marks, within 5mm of the edge of the sheet.
Screenshot D, E & F - probably not relevant.
Solved! Go to Solution.