Imposition bug

[Nyk]

I've now been upgraded to version 4.0.3.1 and the bug has been resolved. Thanks for your help.

[Nyk]

Thank you, I will proceed by getting FFCore updated to the latest release.

[JavierM-Xerox · Accepted solution]

I would first suggest upgrading to the latest version of FFCore: http://www.support.xerox.com/support/core/downloads/enus.html

We have released two service packs and a number of patches since the release you are using. We typically add significant new functionality in service packs.

One thing to note - the location of the sandbox will change when you upgrade.

Additionally, if you are using a service account with FFCore you will need to redo that configuration as well.

If you are still seeing issues with the latest release please let me know.

[Nyk]

I'm encountering a bug with FreeFlow Core (version 4.0.1.1) where the automatic impostion ignores the set margin and pages extend off the edge of the sheet. I can't find any reference to this issue elsewhere on the forum.

In the below example I am imposing an item with a page size 60 x 35 mm using an imposition preset I created. The press sheet size is 320 x 450 mm with 5 mm gutters and 5 mm margins. This imposition works great most of the time, but every now and then I encounter a page size that causes a glitch. 60x 35 mm is one, so is 59 x 54 mm.

Screenshot A - Image goes off the edge of the press sheet.

Screenshot B - The row and column layout is automatic, so it should be best fit.

Sreenshot C - The margin is set to 5mm, so I wouldn't expect FFC to place any image, except bleed and trim marks, within 5mm of the edge of the sheet.

Screenshot D, E & F - probably not relevant.