Imposition on part of the sheet

[CHIEN TRAN]

You can setup workflow like 

WorkflowImpose 6Impose 7Impose 8Enable collect job documents

[Ken895741-XRXL]

Ok, so a 'lot' of strange things are happening in Imposition for me with this application. I developed this on version 6.2.8 and I see you are on 6.1.6. The attached workflow should import and work.

HOWEVER, it will ONLY work for the size 307x80mm. To get it to work at all, had to set some specific dimensions. The 'Auto' doesnt work for this.

What you are doing is typically called Asymetric Imposition. Core supports this with the Output Management license. However, for the record, I tested it there also and it is NOT working how I think it should work. Trying to see if I can get the other size you sent to work. If I can find a consistent issue then we might be able to submit it as a bug and see if they will fix it. Just not sure right now...seeing so many different things.

For now give it a try and let me know. I renamed the 'main' imposition preset so it wont overwrite yours.

[barwapk]

307x80mm_impose_final.pdf - is as it should be.

307x80mm_impose.pdf - this what is Core doing, there is one piece missing and it is shifted

https://wetransfer.com/downloads/d442e3f0a818c9ea02e076f679b7f15a20230420161459/e9b1556c998df38f86ef...

[Ken895741-XRXL]

I need to see an example of what the FINAL job should look like after imposition.

[barwapk]

https://wetransfer.com/downloads/d679842e026db09a71fd177a4acff94920230420140840/043dd9c269c1b64f44fe...

[barwapk]

I think only Xerox Analyst can add files

[Ken895741-XRXL]

Under the area that you type in text, you should see an item to 'Choose File'.  Select that and browse to the zip. Then select Open (bad terminology).  This will attach it to the message then you select Post.

[barwapk]

how to add a zip file here?

[Ken895741-XRXL]

Can you please export a workflow and provide a sample file - we should be able to help with this. But need to see exactly how you are doing it.  The files should be .zip to upload easily. ideally show a picture or image showing how the 2 portions of the page should be laid out.

[barwapk]

Hello,

I need for die cutting to make imposition on two parts of the sheet. For example sheet 450x320mm I need to divide it to 200x320mm and 250x320mm. 

I was trying to make two impositions (on sheets 200x320mm and 250x320mm) and then join them and make another imposition that will impose this two impositons on 450x320mm sheet. But it doesnt work, this last imposition is broken.