Manual imposition

[JavierM-Xerox]

thanks - please submit this to the hotline s that development can take a look.

[KenCBraEU]

Same problem on second Computer, With Ie 11.0.13 SL 5.1.30.514 That is the latest i could find. The same error on Firefox 32.0.3

This computer is i7 with 12 gb ram and SSd disk. Windows 7 64 bit.

My Core version is 4.0.0.2

[KenCBraEU]

I Will check the version of Sl tomorrow and I am running ie. I Will also trykk another pc, with more ram and i7. If i still gett the problems, i Will escalate themed again to support.

[JavierM-Xerox]

Not sure what MS recommends but those specs look like they would provide more than acceptable performance.

Using the latest version of SL?
I would also try IE and FF and see if that makes a difference. Beyond that I would pursue through the hotline.

[KenCBraEU]

I am using an Hp 6450 with I5 prosessor, Ssd disk and 8 GB og memory, connected to the server via GB network.

So what is the recomended hardware to run the silverlight?

[JavierM-Xerox]

I got the templates from Jyri and had a chance to look at your templates.

I was able to recreate similar ones without the problems that you mentioned.

One bit of explanation - when you connect to FFCore, there's a silverlight client that's downloaded to your computer.

This client runs the FFC UI. Nlot sure how fast your computer is but if you are going to do complex workflow building (or some more complex imposition templates) then that's going to require a reasonably fast computer for running the FFC UI. I suspect that's the cause of your problems with the imposition templates.

One last thing I want to reiterate - any formal response should come from the hotline. THe response above is a bit of an educated guess.

[JavierM-Xerox]

I've not seen that sort of problem in the past.

Can you send me the desired imposition template (via private message if you would like)? I would like to make sure I understand your problem / question.

Additionally, please escalate to the hotline? This forum is not a replacement for the formal escalation path.

[KenCBraEU]

I have a small problem that is getting me a huge job.

When i make manual imposing with 21 cards up, example 4 names 4+4 i get a problem when numbering the placeholders. Front sides works excellent, but when i came about half on the baksides I have to save and open, to add a row, save and open and so on. Any one else that have this problem? Its the same on old or new imposition.

I need to make 4-5 templates and this will take a lot of extra time.