It seems to me that you are using Page Order: Repeated in the Layout tab in your imposition. Try using Sequential or Cut and Stack instead. That should give you what you need. After (or before) your imposition you can use Split to control the number of pages in each pdf by for instance using Split By: Segments and Divide into Fixed Page Segments.
I have tried what you have recommended.
My output though is 6 pages in 1 pdf file.
Each page has 6 images of the same pic on it.
I want the output to be, if I have for example only 6 images, I want 1 page in the pdf file with the 6 different images.
Here is an example: http://notes.briner.com.au/images/kons%20test.pdf
Hope that made sense.
Mind you, we will be getting hundreds of these images and I want to be able to control how many pages in a single pdf I can output as well.
If you have Output Management module you could create a new Job Group from the sample you sent, but if you don't you will need to modify your input or use existing fields differently. You could for instance use ProductCode in your example as OrderID to create a Job Group, since it has the same value for all records, but it wouldn't make sense probably.
Here is an example of how it could be done. I renamed your OrderID to FileName and added an extra field and named that field OrderID instead. Mapping OrderID as column G would create a Job Group that you can use for joining and imposing since they share the same value for all records.
You could also add a GroupKey. Here is an example where I added a GroupKey in column H
This would create two Job Groups - one with the first two records and one with the last two records.
So would you have something like this set up? Assuming I have the OrderID in column C?
If this is the case, how does this work with getting lets say, 12 images onto 3 sheets as I can only print 6 per sheet.
If your csv only points to a images, something like this:
then you need to have unique field used as an OrderID/GroupKey that tells FreeFlow Core to keep these images together in a Job Group. Something like this:
In this case you need to map column B as the OrderID/Group Key in the MAX Setup on the Hot Folder.
You can then use Join before Impose in your workflow or use Collect Job Documents on Impose.
I am still struggling to understand how it is all going to work.
I am basically getting orders for example of 1,000 images that we have to print.
All images are different. I can print 6 to a sheet.
I dont understand how to do this.
Are you able to give me an example of what the csv file might look like?
This may be what you are looking for: https://forum.support.xerox.com/t5/FreeFlow-Core/Joining-Multiple-PDFs-with-MAX/m-p/231825
Hoping someone could help. I am stuck at the moment on trying to understand how I can get this workflow setup as is a new concept for us.
Our current workflows are set up of using a csv file through a hot folder with all the information on that csv file to do whatever we need it to do on a single pdf file.
Now, we are looking to see if we can utilize freeflow core to be able to do the following.
We need to be able to step up different images onto a canvas. So we will be receiving orders of images, and every single will be unique. So what we want to know how we can step each image onto a canvas.
I have been playing around with the Imposition mode and created a canvas with 2 columns and 3 rows to get 6 images on each canvas.
My questions are, is this the right approach on the workflow side of it and second, how to I set it up to collect the different images to place on the canvas?