cancel
Showing results for 
Search instead for 
Did you mean: 
digitalprintplus Valued Member
Valued Member

Re: 700 Digital Color Press Device Failure 042-326

Oh yeah thank you very much don't know if you saw the message in the other thread but you had given us a error code reset but it wasn't until today we saw that thread.
I was able to input it and the machine is now good again.
And I must say the colours are a whole lot brighter.
I need to get a calibration ruler and run calibration on it.
But thank you so much for your assistance

We also have to order black developer cause what we realised on the black test prints we ran they came out quite messy
Highlighted
davidm@dmc2it.com New Member
New Member

Re: 700 Digital Color Press Device Failure 042-326

your belt home sensor is getting dirty from dumping toner from the direct pipe assy being clogged due to clumps of toner from humidity. clean out or replace whole waste recycle system. this is an ongoing issues with these style machines from the 700 to the versants. 

0 Kudos
mmpcp New Member
New Member

Re: 700 Digital Color Press Device Failure 042-326

How is the NVM value reset?

0 Kudos
gabiene Frequent Advisor
Frequent Advisor

Re: 700 Digital Color Press Device Failure 042-326

741-132

0 Kudos