Thank you, I'll contact them.
Here is all the information I could find for the Czech republic found here on our world wide contact page.
XEROX CZECH REPUBLIC s.r.o. BB Centrum, Budova Alpha Vyskočilova 1461 / 2a 140 00 Praha 4 firstname.lastname@example.org Recepce +420 227 036 111
Obchodní oddělení: email@example.com
Oddělení HR: firstname.lastname@example.org
Kontakt pro média: email@example.com
Servis: +420 800 125 125, +420 227 036 444, CZE.firstname.lastname@example.org, https://chester.xerox.cz
Spotřební materiál: +420 227 036 519 CZE.email@example.com
Papír a tisková média: +420 227 036 363 CZE.firstname.lastname@example.org
Is there way to contact support via e-mail? I'm from Europe / Czech republic.
You will need to call into the support department @ 1-800-8221-2797.
as I have mentioned, I cannot access any settings via Control panel, because there's no login method configured and I cannot access web UI because there's no IP configured.
Any other suggestions?
Please take a look at this article for resetting the printer back to factory defaults. If you are still having issues after trying these steps, I suggest that you call into our support department for assistance @ 1-800-821-2797.
I tried to install new MFP B225, skipped configuring control panel login method and then by mistake disabled getting IP from DHCP before setting static IP and saved.
Now I cannot set IP via control panel because not login method is configured and cannot acces web UI because no IP is set.
I there way to somehow reset printers factory defaults?
Solved! Go to Solution.