cancel
Showing results for 
Search instead for 
Did you mean: 
Highlighted
Valued Advisor
Valued Advisor

Re: Can not connect to Web interface through Internet Explorer

Jump to solution

wll if you goto this tip for that 3220 , they mention about thw http protocol that needs to be enabled...

 

http://www.support.xerox.com/support/WC3210_WC3220/support/en_US.html?objGUID=1938

0 Kudos
Highlighted
New Member
New Member

Re: Can not connect to Web interface through Internet Explorer

Jump to solution

Fabio,

 

That worked!  Thanks.  I didn't even think to look under "Centerware IS".  That was turned off.  Who knew that meant "HTTP"???  :)

 

Thanks again for the help.

0 Kudos
Highlighted
Valued Advisor
Valued Advisor

Re: Can not connect to Web interface through Internet Explorer

Jump to solution

no problem :)

0 Kudos
Highlighted
New Member
New Member

Re: Can not connect to Web interface through Internet Explorer

Jump to solution

Hi I have a Workcentre 5687 at my work and we have the EXACT same problem, except I haven't been able to find a solution.

 

The machine is on the network and fully pingable.  On the configuration page, HTTP is enabled, SSL disabled (no https), but when I try to access the CWIS web interface, the web page does not load in either Internet Explorer or Firefox.  I've tried resetting the system, disabling and re-enabling the HTTP service, but to of no avail. I tried telnetting the machine on port 80 but the connection refused. HTTP service is enabled on the control panel on the machine. There is no proxy or firewalls on the network, and it's on the same subnet that my PC is on. I don't know what else I am supposed to look at to fix the problem.

 

Please help.

0 Kudos
Highlighted
Community Manager
Community Manager

Re: Can not connect to Web interface through Internet Explorer

Jump to solution

The At Your Service blog has posted an article about troubleshooting issues with CentreWare Internet Services (CWIS)  called  Xerox CentreWare Internet Services: What if it Won’t Display?  I hope that you might find the answer to your issue in the blog article. 

Thanks,
CherylO-Xerox
Community Manager

Be sure to click Kudos for those who have helped you.
Select Accept as Solution for posts that have helped to solve your issue(s)!

0 Kudos
Highlighted
New Member
New Member

Re: Can not connect to Web interface through Internet Explorer

Jump to solution

I have just now purchased xerox 3220. It came with 2.50.00.100 firmware. When I tried to set the SMTP there was no option for SSL. And without SSL I cant setup my gmail address. After going through the support forum I come to know that the device needs firmware upgradation. So I upgraded it to new firmware on your support site i.e 2.50.00.105. Before installation of firmware I can easily access my CWIS. But after successful installation of new firmware I can ping my machine successfully but cannot access it using CWIS. The CWIS option is enabled on the machine. I dont know how can I access it and check if http is enabled or not.

 

I have also contacted local service center. But they told me we are not giving serives to small machines. We are here only for big machines. I will think if I have to buy a big machine in order to take exclusive services.

 

Please help me in this regard

 

Thanks

0 Kudos