cancel
Showing results for 
Search instead for 
Did you mean: 
Highlighted
New Member
New Member

Can't setup wifi Phaser 3020 MacOS

Jump to solution

Hello guys,

today i bough a brand new printer model Phaser 3020 but i can't set up properly the wifi connection. I have a MacBook Air and i already download the print driver v1.06.00.

I can print via USB but i don't know how to connect my printer via wifi :/

 

 

0 Kudos
3 Replies
Highlighted
Valued Advisor
Valued Advisor

Re: Can't setup wifi Phaser 3020 MacOS

Jump to solution

When installing the printer, you can use the Xerox Easy Wireless Setup program to configure the wireless settings.

Disable WiFi Direct at the Control Panel

  1. Press the [Machine Status] button.
  2. Press the Up/Down arrows to select [Network] and press [OK].
  3. If prompted, enter the Administrator Password using the alphanumerical keypad. The default is 1111.
  4. Press the up/down arrows to select [Wi-Fi] and press [OK].
  5. Press the up/down arrows to select [Wi-Fi Direct] and press [OK].
  6. At the Wi-Fi On/Off menu, press [OK].
  7. Confirm that Off is selected and press [OK] to save the settings.

To Open the Program on Windows PC:

  1. Select Start>Xerox Printers > Xerox Easy Wireless Setup.

    Note
    : For Windows 7: Select Start > Programs or All Programs > Xerox Printers, and then select Xerox Easy Wireless Setup.

  2. Connect the machine to your computer using the USB cable.

    Note: During installation, the printer needs to be temporarily connected using the USB cable.

    Note: You cannot use the Phaser 3052 / 3260, WorkCentre 3025 or WorkCentre 3215 / 3225 models on a wired and wireless network at the same time. If your printer is connected to the network with an Ethernet cable, unplug the cable.

  3. Select Next.
  4. Once the machine is connected to the computer with the USB cable, the program searches for WLAN data.
  5. When the search is complete, the Select Wireless Network window displays. Select your network from the list.
  6. Select Next. The Wireless Network Security screen displays.
  7. Enter your Network Password and select Next.
  8. At the Wi-Fi Direct Settings screen, uncheck the box next to Yes, I want to turn on Wi-Fi Direct on my printer.
  9. Select Next.
  10. Click Finish when the Wireless Network Setup Complete screen displays.

<I don't remember where it is in a Mac when installed from the disk, but I think it is called Wifi Setup Wizard and can be found via search>

Please be sure to select "Accept Solution" and or select the thumbs up icon to enter Kudos for posts that resolve your issues. Your feedback counts!

Joe Arseneau
Highlighted
New Member
New Member

Re: Can't setup wifi Phaser 3020 MacOS

Jump to solution

Than you for your response.

I don't have a cd compartiment in my MacBook so i can't see the files in the set up disc. I only install the internet drivers provided by the "Drivers" section in the Xerox Page. 

I was looking for some Wifi Setup Wizard but i can't find it in my laptop, also when i was intalling the drivers i didn't see the wifi configuration doing all the steps. 

0 Kudos
Valued Advisor
Valued Advisor

Re: Can't setup wifi Phaser 3020 MacOS

Jump to solution

Install this.

If that won't install in 10.15 there is nothing more I can offer.

If your router supports WPS, you can push that button on your router, once the light starts to blink on the router, do the same on the printer and they should connect.

Please be sure to select "Accept Solution" and or select the thumbs up icon to enter Kudos for posts that resolve your issues. Your feedback counts!

Joe Arseneau