Connect laptop

[Joe Arseneau]

You need a crossover cable.

From the Windows 7 client Workstation do the following;

• Click start/control panel/Network and Sharing Centre.
• Under “view you active connections” click the hyperlink below “Access Type: Internet” on your active connection.
• Click the properties radio button.
• Select Internet Protocol version 4 and click the properties radio button.
• Select “Use the following IP address” and enter the following;

IP Address: 10.1.1.1

Subnet mask: 255.255.255.0

Gateway: [leave-it-blank]

DNS Servers: [leave-it-blank]

• Click ok and close the control Panel.

From the Printer

• Work with your printer vender to access the tcp/ip v4 settings of the network card and enter the following;

IP Address: 10.1.1.2

Subnet mask: 255.255.255.0

Gateway: [leave-it-blank]

DNS Servers: [leave-it-blank]

[chris31849]

I need to update my wifi password. I need to access the settings page by connecting a laptop directly to the copier.

How do I do that?

what cable do I use to connect a laptop to access the settings window?