How to find OOID Mib for Xerox Products Supplies Level - Need documentation

[8ternity]

Hi @FrankCGF

Thanks for the info.

Did you know in MIB Browser where is located Coverage % of each supply?

[FrankGCF]

Hello Ternity 
I hope this helps you need to divide some fields to get the correct leves

 Hostname 1.3.6.1.2.1.1.5.0
Black toner 1.3.6.1.2.1.43.11.1.1.8.1.1        1.3.6.1.2.1.43.11.1.1.9.1.1
Cyan toner 1.3.6.1.2.1.43.11.1.1.8.1.2       1.3.6.1.2.1.43.11.1.1.9.1.2
Magneta toner 1.3.6.1.2.1.43.11.1.1.8.       1.3 1.3.6.1.2.1.43.11.1.1.9.1.3
Yellow toner 1.3.6.1.2.1.43.11.1.1.8.1.4     1.3.6.1.2.1.43.11.1.1.9.1.4
Drum Cartriedge 1.3.6.1.2.1.43.11.1.1.8.      1.5 1.3.6.1.2.1.43.11.1.1.9.1.5
Drum Cartriedge 1.3.6.1.2.1.43.11.1.1.8.1.6      1.3.6.1.2.1.43.11.1.1.9.1.6
Drum Cartriedge 1.3.6.1.2.1.43.11.1.1.8.1.7          1.3.6.1.2.1.43.11.1.1.9.1.7
Drum Cartriedge 1.3.6.1.2.1.43.11.1.1.8.1.8            1.3.6.1.2.1.43.11.1.1.9.1.8
Waste Container 1.3.6.1.2.1.43.11.1.1.8.1.10            1.3.6.1.2.1.43.11.1.1.9.1.10
Transfer Belt 1.3.6.1.2.1.43.11.1.1.8.1.11              1.3.6.1.2.1.43.11.1.1.9.1.11
Transfer roll 1.3.6.1.2.1.43.11.1.1.8.1.12                1.3.6.1.2.1.43.11.1.1.9.1.12

[8ternity]

Hi @TammyL-Xerox,

I have browse the prMarketSupplies into MIB Browser and drums are shown in percentages, but toners i don't know what is the value of it.

Here actual %

- Toner Black is 10%   (ptMarkerSuppliesLevel 53) Max Capacity is 5300
- Toner Cyan is 20%   (ptMarkerSuppliesLevel 690) Max Capacity is 3000
- Toner Magenta is 60 % (ptMarkerSuppliesLevel 1770) Max Capacity is 3000
- Toner Yellow is 20% (ptMarkerSuppliesLevel 671) Max Capacity is 3050

I don't know what is the calcul for resulting the actual percentage.

Any help?
Thanks.

[TammyL-Xerox]

Hello 8ternity, 

I could only find how to check the supply status via the printer or embedded web server.

If this is not what you are looking for please consider calling into the support department @ 1-800-821-2797, 

[8ternity]

Hi @TammyL-Xerox,

If you can only provide me one for more understand how it works, example Xerox AltaLink C8030 series.

Thanks

[TammyL-Xerox]

Helo 8ternity, 

Since you are looking for information on so many different products it would be best for you to call into the support center @ 1-800-821-2797. 

[8ternity]

Hi,

We would like to have a documentation about how to find Supplies level with SNMP Get, SNMP Walk to retreive all supplies level and follow them into a custom software.

The the billing meter, we found the address into SNMP Walk without problem. But level, i found no really easy documentation on how to retreive theses informations.

We mainly need it for Xerox Phaser, WorkCentre, VersaLink, AltaLink and small A4 C and B Series.

Any help is appreciated.

Thanks,