cancel
Showing results for 
Search instead for 
Did you mean: 
amosjackson New Member
New Member

Maximum Printable Area of WorkCentre 7220/7225

Hi, I've been searching online everywhere and can't find the maximum printable area for A3 paper on a WorkCentre 7220/7225.

 

It would be great if I could have this information.

0 Kudos
1 Reply
Analyst Nation Moderator Joe053204-hcl
Analyst Nation Moderator

Re: Maximum Printable Area of WorkCentre 7220/7225

I don't think you will find it for paper sizes, I can say that the unprintable margin for all paper is supposed to be 4.4mm/ .17 inches from the edge of the paper (Xerox does not make borderless printers)

 

So two margins of 4.4mm is 8.8mm reduced for each direction.

A3 is 297mm * 420mm.

So the print area should be spec'd at 288.2mm * 411.2mm.

 

Of course there are shifts that occur with stock types and machine degradation (worn rollers etc) so the best way to *know* without a doubt what your particular device is capable of (Not what it is supposed to be able to do) the best way is to lift the document feeder and make a copy of absolutley nothing on to whatever stock you want to see the margins for. The light in the room will cause the machine to output a page of nothing (black). This will clearly show exactly where your margins are.

Please be sure to select "Accept Solution" and or select the thumbs up icon to enter Kudos for posts that resolve your issues. Your feedback counts!

Joe
0 Kudos