cancel
Showing results for 
Search instead for 
Did you mean: 
donze New Member
New Member

Network controller unavailable and enablement code

On startup my WC 5150 gives me a "Network Controller Unavailable" message. It usually happens after the menu gets to about 75% done. 

 

If I allow it to get to the error message and select the option to contiue without network, the copier works fine. If I try to login to ADMIN,, before I receive the User name and Password request, it asks for an enablement code.????

 

I have tried the codes from several of the manuals I have but no luck. 

 

The machine only has 299 original copies on it.  It use to startup fine when I would periodically test it but now it has issues.

 

Thank You

 

don

 

0 Kudos
1 Reply
Community Manager CherylO-Xerox
Community Manager

Re: Network controller unavailable and enablement code

Hi Donze,

Thank you for using the Support Forum. Please take a look at the soltuions for the machine not completely booting up.  Also take a look at the solution for Network Controller Unavailable.  If none of these solutions help please consider contacting your support centre for further assistance.

Thanks,
CherylO-Xerox
Community Manager

Be sure to click Kudos for those who have helped you.
Select Accept as Solution for posts that have helped to solve your issue(s)!

0 Kudos