Is there a job aid or a link with step-by-step instructions for performing print registration on the Nuvera 144 MX? When trying to center the alignment, I keep getting a message that the values I'm entering are outside the NVM range of -10.0/10.0. When I try to bring the values into the '10' range, the alignment gets more skewed. Thanks.
If this is being performed from User Diagnotics, the instructions on the dc0604 screen will lead you through the procedure.
10.00 is a pretty large jump, this is the full width of the reference graph.
Ensure the skew you are seeing is not being generated by a particular paper tray or stock.
A skew this large that is not correctable may need your local Xerox Service Team to be involved.
hope this helps