cancel
Showing results for 
Search instead for 
Did you mean: 
Highlighted
thatbillguy New Member
New Member

Paper trays show empty, though both have paper

Product Name: Xerox 3655
Operating System: Windows 10 x64

The 3655 has the additional paper tray module installed. Tray 1 & 2 show as empty, even though both have paper. Bypass works correctly.

It seems that the paper is not being lifted into position.

0 Kudos
1 Reply
Mohammad_armouti Contributor
Contributor

Re: Paper trays show empty, though both have paper

Hi thatbillguy,

try to remove the bypass tray to have a clear view of the tary lift mechanism and see if it lift or not.

if it not so pull out the tray 1 and remove the paper then check the release buttons operation ; actually they are located on the left inboard side of the tray itself "one up and one down ".

050K72341.jpg

manually left up the tray by pressing and keep holding  the button number 2 then push the button number 1 the tray plate must left up to the maximum level  ,if it didnt so try to clean and lubricate the gear path.

note that these buttons are actuated by the inside machine frame 

otherwise it could be that the tray 2 feed head is not aligned correctly "out of it home position 

regards,

Kindly select "Accept Solution" and
or select the Kudos button .
Your feedback counts!

 

 

0 Kudos