cancel
Showing results for 
Search instead for 
Did you mean: 
Highlighted
Valued Advisor
Valued Advisor

Re: Phaser 6510 - Paper size issues (a4) and jams

Jump to solution

Hi,

You should check in Printing Preferences paper selections to be setup on A4

Driver.pngDriver2.png

0 Kudos
Highlighted
New Member
New Member

Re: Phaser 6510 - Paper size issues (a4) and jams

Jump to solution

Hi Gabienne,

that is the first setup before printing:)

0 Kudos
Highlighted
New Member
New Member

Re: Phaser 6510 - Paper size issues (a4) and jams

Jump to solution
Having tried printing from multiple devices, laptop, iPhone that worked fine one day and then not the next without any setting changing I am convinced it’s a fault with the actual printer.
0 Kudos
New Member
New Member

Re: Phaser 6510 - Paper size issues (a4) and jams

Jump to solution

Having just spoken through with printerland support have got it working, but will see if the settings hold for more than a day.

Have had to edit the settings in 5 places, two of which should have been changing the same setting but didn't.

 

  1.  Set Tray 1 on the printer to A4
    Admin Menu > Printer Settings > PaperSizeSettings > Tray 1> *A4
  2. Set the Paper tray priority
     Admin Menu > Printer Settings > PaperTrayPriority> Tray 1> Priority:1
  3. On PC set the advanced preferences to A4:xerox 0.PNG

     

    Set the advanced preferences to A4 again elsewhere (Should have worked on step 3 but doesn't):
  4. xerox 1.PNG

     

  5. Set the device settings for bothTtray 1 and bypass tray to A4:xerox 2.PNG

     

OK and apply everything. Good luck.

0 Kudos
Highlighted
Valued Advisor
Valued Advisor

Re: Phaser 6510 - Paper size issues (a4) and jams

Jump to solution

Hi,

So, everything is about setting, but everybody blames printers.

0 Kudos
Highlighted
New Member
New Member

Re: Phaser 6510 - Paper size issues (a4) and jams

Jump to solution

Who knows, but I have never ever seen a printer or driver whereby I've had to change the settings in so many places and what's been set in one location isn't carrying through to the other locations where it is the same setting and should be automatically recognised.  Sounded like the support guy was doing back to back calls on these Xerox 6510's for the same issue so something is not right with them. Also the fact it can work fine one day and not the next, for all devices PC, airprint would suggest it is the printer not storing or holding the settings correctly.

Anyway let's hope the settings hold and this works permanently. 

0 Kudos
Highlighted
New Member
New Member

Re: Phaser 6510 - Paper size issues (a4) and jams

Jump to solution

Hi Gabienne,

 

try to understand what has been posted

0 Kudos
Highlighted
New Member
New Member

Re: Phaser 6510 - Paper size issues (a4) and jams

Jump to solution
The setting you are talking about is the first printer setup. We all did that! stll the printer keeps asking for Letter format when is is set to A4
0 Kudos
Highlighted
New Member
New Member

Re: Phaser 6510 - Paper size issues (a4) and jams

Jump to solution

Hi Carlos

That is exactly what was happening for me.  I can just say check you've done all those locations, even when it feels like you are doing the same thing twice.

The only other setting I changed was on the printer set the admin > printersettings > duringloading option to no attribute change so it doesn't try and reset itself when the tray is opened and closed.

Good luck

Teddie