cancel
Showing results for 
Search instead for 
Did you mean: 
4 Replies
truckmann
New Member
New Member

Re: Phaser 7500 - printable area

For anyone else that may stumble upon this information, it is incorrect. The closest the Phaser 7500 can print to the edges is 5mm on all sides. This is sad since the 15+ year old printer that this thing has replaced was capable of better than this. 

0 Kudos
TimD-USX13774-xrx
Technical Escalation Support
Technical Escalation Support

Re: Phaser 7500 - printable area

Hi Karina,

 

Make sure you are using the latest postscript driver available for the Phaser 7500 available on Xerox.com.  If that does not resolve your issue, please contact us for additional support.

 

Thank you,

Tim

Thank you,
Tim
Xerox 2nd Level
Remote Support Engineer

Be sure to click Kudos for those who have helped you.
Select Accept as Solution for posts that have helped to solve your issue(s).
0 Kudos
kaika313
Occasional Contributor
Occasional Contributor

Re: Phaser 7500 - printable area

Hi Tim,

 

thank you for your reply.

Even if 7500 has the printable area shown in the image you sent us we can only obtain this:

Printable Area7500.jpg

So for one side (right or left the same) we cannot use the maximum printable area...

Is there something we can do?

 

Thank you

 

Karina

0 Kudos
TimD-USX13774-xrx
Technical Escalation Support
Technical Escalation Support

Re: Phaser 7500 - printable area

Hi kaika313 - I spoke with engineering and was able to get this information for you.

 

• Maximum Printable Area: 305 mm x 1192 mm
• Guaranteed Printable Area: 297 mm x 477 mm

 

The difference between max and guaranteed printable area normally is that, even though we may be able to print onto the page close to the edge, beyond the guaranteed area some print quality artifacts may appear. There is a variety of things in consideration, media, application, file design, etc.

 

 

Phaser 7500 Printable Area

 

Hope this helps.

 

Thank you,

Tim

Thank you,
Tim
Xerox 2nd Level
Remote Support Engineer

Be sure to click Kudos for those who have helped you.
Select Accept as Solution for posts that have helped to solve your issue(s).
0 Kudos
kaika313
Occasional Contributor
Occasional Contributor

Phaser 7500 - printable area

Product Name: Other - specify product in post

Hi,

we have a Phaser 7500 and want to know what is the max printable area. We searched in user manual and also in Xerox support page but we didn't find anything about it, only about how to calibrate margins.

Where we can find printable area specifications?

 

Thanks in advance

 

Karina

0 Kudos