WC 7855 Fuser System Error

[fiery]

Sounds like you need a service call. Maybe a new fuser could help.

[Joe Arseneau]

10-527 due to broken NVM values for the fuser, which you mention resetting in 2 machines intentionally in one of your other posts.

The reset caused corrupted values for the Fuser module, and due to those values, it gets reported that the thermister has opened after gets hot during a run.

You need a certified tech to rebuild your system now, you may be able to fix it by doing a forced altboot with no clone and no data backup, but no guarantees because some NVM values don't get re-written even after a full load.

This forum will not be helping with NVM settings, there are good reasons why they are hidden in Diagnostics mode.

04-563 is for the rear cooling fan, I would assume it is broken, or blocked by being pushed up against a wall.

[Loydsongibbs]

Please Can someone help with these error codes 10-527 and 04-563? When this errors occured I powered OFF and then ON the machine comes to ready state. But before 10-20 copy or print jobs are done the errors surfaced again. And it keeps reocurring. Help Please!!!!