Will 8R12941 refill work with 8R13177 cartridge?

[Joe Arseneau]

Stick a pin in here to release the clip

Squeeze these two spots and lift at the same time as the pin in the above

Lift out of the carriage

Put in the replacement cartridge by simply setting it in at an angle as seen in the last picture, it will sit right into the spot and lock into place.

[nrbristow]

I did not find Instructions, just confirmation that the part can be used as a refill.

[MikeT58]

nrbristow,

Did you find intruction on how to replace 8R13177 with the cartridge 8R12941

miket58

[GaryM-Xerox · Accepted solution]

Hello,

I've had a dig around and found information that indicates 8R12941 is a refill for 8R13177 (used with WorkCentre 7970 and Xerox Colour C60/C70 BR Booklet Maker finisher).

BR Booklet Maker Finisher

8R13177 Staple Cartridge (1 cartridge with 5000 staples)

8R12941 Refill for 8R13177 (3 refills, each refill contains 5000 staples)

[nrbristow]

I can't seem to find any information for the refill of 8R13177. I would like to know if 8R12941 will work as a refill. If not, is there a refill part # or do I need to order a whole new cartridge? Thanks.