cancel
Showing results for 
Search instead for 
Did you mean: 
Highlighted
New Member
New Member

WorkCentre 6515 - Error Code 050–143

Product Name: WorkCentre 6515
Operating System: Windows 10 x64

Hello,

Been getting error code 050–143, which says it's a paper jam. But can't find any left over paper from the front or back hatch. Also can't find any information about this error code when searching so wondering if it's something else?

Also seen 071-101 code and followed those instructions to clear any paper jams, but can't find anything left in the machine.

Any suggestions where to look or other information about this code?

0 Kudos
3 Replies
Valued Advisor
Valued Advisor

Re: WorkCentre 6515 - Error Code 050–143

Hi,

It could be from an improper lifting of the tray so try next:

Disable the top release using the instructions below. This has no detrimental affect on the operation of the cassette.6510 tray.png

If this assembly comes apart, it should be re-assembled as shown below, so that the "lift dampening" of the assembly still functions properly.

 

Gabi

Highlighted
New Member
New Member

Re: WorkCentre 6515 - Error Code 050–143

Thanks, we had a look at this and got that part working so it pushes up the paper but still getting the error message.

Wondering if it's the rubber on the wheels that feed the paper that's worn out? It's a bit over 2 years old.

 

0 Kudos
Highlighted
Valued Advisor
Valued Advisor

Re: WorkCentre 6515 - Error Code 050–143

Yes, it could be and the part number for Feed Roll Kit is 607K00051.

0 Kudos