cancel
Showing results for 
Search instead for 
Did you mean: 
Highlighted
New Member
New Member

Xerox 5030 Fuer Module warm up failure

Hi,

I am new here so I hope I am posting correctly.

 

I Have a 5030 Workcenter that is giving me a "Fuser Module warm up failure". I replced the Fuser with a new unit and still have the same warning.

 

Can anyone help? Suggestions, Etc...

 

Thanks, Chris...

0 Kudos
4 Replies
Highlighted
Valued Advisor
Valued Advisor

Re: Xerox 5030 Fuer Module warm up failure

Check the electrical contacts on the machine, they may just be dirty so the connection isn't made so the heater never starts.

Please be sure to select "Accept Solution" and or select the thumbs up icon to enter Kudos for posts that resolve your issues. Your feedback counts!

Joe Arseneau
0 Kudos
Highlighted
New Member
New Member

Re: Xerox 5030 Fuer Module warm up failure

Hi Joe,

 

Blew out the machine, Checked conections, etc. Still no heat on the Fuser. Fuser does not even get warm at all.

 

Any other ideas to check?

 

Thanks in advance...

Chris...

Failure warning..JPG

0 Kudos
Highlighted
Valued Advisor
Valued Advisor

Re: Xerox 5030 Fuer Module warm up failure

Find a service manual with wiring diagram and follow the power wire back from the fuser until you find what has blown

Please be sure to select "Accept Solution" and or select the thumbs up icon to enter Kudos for posts that resolve your issues. Your feedback counts!

Joe Arseneau
0 Kudos
Highlighted
New Member
New Member

Re: Xerox 5030 Fuer Module warm up failure

Here is a listing of the 6 most reacent error codes..

 

Thanks,

Chris.

 

Error codes.JPG

0 Kudos