Xerox 6655 unable to boot up

[Joe Arseneau]

FAT32 (Win10 doesn't give the option for sticks above 8GB)

The one with 073.110.009.03700 in the name (at the time of this writing)

[dbudwal]

Hey Joe, thanks for your reply.

Question one does the USB need to be formatted in a certain format and second there are two dlm files, do I put both in the folder or keep one.

[dbudwal]

Hey, Im having the same issue, can you private message the details as well. Will appreciate it. Thanks

[Joe Arseneau]

Like the others, check your PM's

[Jacques6]

Hi Joe. My 6655 wont boot up at all, just show a white screen. i cant use the connect key software upgrade because it wont show an IP address, i tried using a USB to load software but was also unsuccessful. i then replaced the hard drive but is still unable to load software - i also tried a new Ess board but that didn't help so i put the old one back. any suggestions ?

[Mahmowenchike]

Could I also get the solution PM'd? Thanks!

[sfjcwen]

Hi, Joe. Can I get a Solution per PM too? My WC 6655 stuck in boot screen too.
Thank You very much

[dan_geo]

I have a 4265 that just started doing the same thing.

[MHS]

Hello Joe,

I am also experiencing this exact issue. Can you PM me instructions?

[Joe Arseneau]

Done