Xerox Color 550 - Turn off startup configuration report page

[v.andreev · Accepted solution]

Hi guys,

Try this :)

Open an Internet browser window.
Enter the IP Address of the Fiery Server in the Address field, and then press [Enter] on the keyboard. The Fiery WebTools window will be displayed.
Click on the [Configure] tab located on the top right side of the window.
Click on the [Launch Configure] button. A login window will be displayed.
Click on [Server] on the left side of the window to expand the menu.
Click on [Jobs].
Click on the checkbox to enable or disable the Print Start Page option.
Click on [Apply].
Click on [Reboot] to reboot the server and apply the changes. A confirmation window will be displayed.
Click on [Yes] to reboot the server. A "Please Wait" message will be displayed.
Close all open windows.

[Kimzi]

Hi!

This should be configured under the Fiery setup, I do not have a Fiery so cannot provide you with the steps, sry about that.

Best Regards

Kimzi

--------------------------------------------
Please remember to select "Accept as Solution" for posts that helped you solve the issue.

[MJGraphics]

Hello,

I have the same exact question and I am in the same scenario. Everytime I turn the C550 and Fiery on the startup page prints. It's not a big deal, but it seems a bit wasteful. I have been searching online for any information, but have not found anything.

[fiery]

The startup config sheet is printed by the Fiery DFE so it should be in the Fiery settings.

[MSPTestAccount]

Hi dimada19.

Thank you for using the forum.

We have an extensive knowledge base for this product at

http://www.support.xerox.com/support/xerox-color-550-560/support/enus.html?associatedProduct=XRIP_55...

I have searched and found this solution for turning off the config report. 

http://www.support.xerox.com/support/550_560_DCP/support/en_US.html?objGUID=5472

I hope it helps.

[dimada19]

Hi. I would like to know how to turn off the configuration report page at startup. I have been looking through the forums how to do it, but the threads I found were for turn off this featured on other printers, I tried them but they didn't work on my Xerox Color 550. 

I would appreciate you guys help me out with this.