I see no one has responded to this post yet. So, at this point I would recommend contacting your local Xerox Support Department to speak with a Product Specialist for more assistance. Please call 1-800
I see no one has responded to this post yet. So, at this point I would recommend contacting your local Xerox Support Department to speak with a Product Specialist for more assistance. Please call 1-800-821-2797 or 1-800-835-6100.
This one is aimed at anyone with Xerox device experience, or those who may have designed these printers. I had a cusomter's 6515 die today, as the Transfer belt ripped (yes... torn down the middle), Jammed up the printer and basically destroyed itself in general. RIP Printer, customer getting a new one... Following getting this sorted with the customer, I've started to poke at the printer a bit with a screw driver, and found that the display screen has a MiniDP/Thunderbolt type connector and cable. So i've disconnected it and taken the screen off the printer... Does anyone know anything about these screens, and how they work? There were no other connectors to the screen other than one to a speaker, so I know the screen must be getting power from the connector. There also must be some kind of data transfer on there as well, as the unit is a touch screen, plus has a NFC reader of some kind. The screen is a really nice little unit, so i'd love to be able to use it for something else... Anyone with some experience?