Xexrox Workcentre 3045 IP changed

[rafiqelmansy]

Hi,

Thank you so much for your reply. When I choose Auto IP in the printer, I got it set as following:

Auto IP

IP: 169.254.248.171

Mask: 255.255.0.0

Gateway: 169.254.248.171

When I add the IP to my Mac printers and try to print, I got the following error:

Connecting to printer...

Network host '169.254.248.171' is busy; will retry in 10 seconds

Also, when I try to access the printer web interface by typing the IP in the browser, it does not work.

I really appreciate if you can help in this.

Thanks,

Rafiq

[Kimzi]

Heya!

If the machine is getting an valid IP-address.

You can solve this problem by installing the printer manually on the MAC, and putting in the correct IP-address.

To do this firstly remove the printer in your printer queue by right clicking on it and selecting remove.

After this go to the plus-sign in the left-bottom corner, and choose IP at the top tabs in the new window.

Punch in the correct IP-address in printer name/address

In job queue write LP

and on Print using select the correct driver for the machine.

This should resolve your problem.

Thanks!

[rafiqelmansy]

Hi,

I have Xerox Workcentre 3045 and I am connecting it to my DSL connection through IP. Yesterday, I find that the printer got conflict in IP and its IP changed, since then I cannot print because my Mac computers do not see the printer IP.

How can I solve this problem and get configure the printer IP?

Thanks for your help.