It started about a month and a half ago. I rand dell diagnostics and had a hard drive error. I replaced the hard drive and still had the same problem. There were no changes to the computer prior to the problem starting.
Hello, i've the same problem. i disactivated the snmp but the printer goes in standby the fan stop and after 10 seconds the fan restart... thank you in advacne!
We received a Xerox 7220 today as a replacement for the aging 7132. And the fan just keeps spinning even though the printer has nothing to do!
The technician who set the printer up suggested disabling SNMP which I did for ALL connected PCs - but it did not really help. As soon as the printer is connected to the network the fan starts almost immediately and stays on most of the time. Which is especially annoying because the fan is - even though it is not damaged - really loud.
The engineer who came up with the crazy idea to use a high RPM 40x40mm fan to cool this little chip even though there is lots and lots of space available where a proper slow moving large fan could have been fitted should be drawn and quartered.
Ok I tried update driver, but no change. And I ran that Wireshark, and I think I find somethink. My printer has IP adresse 192.168.11.27 and one od those packets Elitegro still asking who has that adresse, but I dont know how I can stop it.