xerox 5335 start up problem

[Lafeverrr]

---

@jallokag wrote:

The xerox workcentre 5335 stops at 1/6 level when starting and tellpopeyes you dial any key, it start to blink: A repeated one short blink followed by a long blink.

---

From the powered on state, hold down the "0" button for six seconds and then press the "Start" button while still holding the "0" button. The machine will prompt you for a password. Enter the default access number "6789" and press "Confirm." The display will acknowledge that you are now in diagnostic mode.

[TammyL-Xerox]

Hello jallokag, 

Thank you for using the forum, have you tried powering off then unplugging the device from the outlet for 2 minutes.  

If you're still having issues after trying these steps please consider calling our support department for additional assistance.

[jallokag]

The xerox workcentre 5335 stops at 1/6 level when starting and when you dial any key, it start to blink: A repeated one short blink followed by a long blink.