cancel
Showing results for 
Search instead for 
Did you mean: 
jallokag
New Member
New Member

xerox 5335 start up problem

Product Name: xerox workcentre 5335

The xerox workcentre 5335 stops at 1/6 level when starting and when you dial any key, it start to blink: A repeated one short blink followed by a long blink.

0 Kudos
2 Replies
TammyL-Xerox
Administrator
Administrator

Re: xerox 5335 start up problem

Hello jallokag, 

Thank you for using the forum, have you tried powering off then unplugging the device from the outlet for 2 minutes.  

If you're still having issues after trying these steps please consider calling our support department for additional assistance.

Thanks,
TammyL-Xerox
Community Manager

Be sure to click Kudos for those who have helped you.
Select Accept as Solution for posts that have helped to solve your issue(s)!
Lafeverrr
New Member
New Member

Re: xerox 5335 start up problem


@jallokag wrote:

The xerox workcentre 5335 stops at 1/6 level when starting and tellpopeyes you dial any key, it start to blink: A repeated one short blink followed by a long blink.


From the powered on state, hold down the "0" button for six seconds and then press the "Start" button while still holding the "0" button. The machine will prompt you for a password. Enter the default access number "6789" and press "Confirm." The display will acknowledge that you are now in diagnostic mode.

Tags (1)
0 Kudos