cancel
Showing results for 
Search instead for 
Did you mean: 
Buser Member
Member

7142, E162 erreur

Nous avons an unusual

code E-162 on Xerox /Mitoh/ 7142 plotter.

The code appears after the replacement of the plotters pump.

This code is not described in our services manual ; perhaps due to the fact that the later dates back to 2007.

 

Thank you very much in advance

 

0 Kudos
1 Reply
Highlighted
Analyst Nation Moderator Joe053204-hcl
Analyst Nation Moderator

Re: 7142, E162 erreur

Sorry this took so long, but I found a suggestion. I have never seen the printer or anything like it, I had to source the information from someone in France (I'm Canadian)

 

You have to go under Parameter Initialization Menu

And init the pump counter.

 

 

 

E 162 error P

life

Pump has

reached the end

of life.

  1. Turn machine OFF.

Turn it ON again

and check if the

same message

appears.

If message appears:

Refer to action in check

item No. 2.

-

  1. The number of

endurance running

cycles of pump has

reached the

specified value.

Replace pump "4.7.2

Replacing

Pump Cap

Assembly"

p.4-52

  1. Main board

assembly may be

damaged.

Replace main board

assembly.

"4.3.3

Replacing

Main Board

Assembly"

p.4-22

Please be sure to select "Accept Solution" and or select the thumbs up icon to enter Kudos for posts that resolve your issues. Your feedback counts!

Joe