Showing results for 
Search instead for 
Did you mean: 
1 Reply
Joe Arseneau
Valued Advisor
Valued Advisor

Re: 7142, E162 erreur

Sorry this took so long, but I found a suggestion. I have never seen the printer or anything like it, I had to source the information from someone in France (I'm Canadian)


You have to go under Parameter Initialization Menu

And init the pump counter.




E 162 error P


Pump has

reached the end

of life.

  1. Turn machine OFF.

Turn it ON again

and check if the

same message


If message appears:

Refer to action in check

item No. 2.


  1. The number of

endurance running

cycles of pump has

reached the

specified value.

Replace pump "4.7.2


Pump Cap



  1. Main board

assembly may be


Replace main board




Main Board



Please be sure to select "Accept Solution" and or select the thumbs up icon to enter Kudos for posts that resolve your issues. Your feedback counts!

Joe Arseneau

7142, E162 erreur

Product Name: Other - specify product in post

Nous avons an unusual

code E-162 on Xerox /Mitoh/ 7142 plotter.

The code appears after the replacement of the plotters pump.

This code is not described in our services manual ; perhaps due to the fact that the later dates back to 2007.


Thank you very much in advance


0 Kudos