cancel
Showing results for 
Search instead for 
Did you mean: 
AlexanderGur13
New Member
New Member

Altalink C8030 doesn't load

Jump to solution
Product Name: AltaLink C8030 / C8035 / C8045 / C8055 / C8070 Color Multifunction Printer
Operating System: Windows 10 x64

Hello. After a power outage in the room, the Xerox Altalink C8030 does not load further than the first screen saver.(post code 5). I want to make an Altboot firmware, but I can't find the 100. xxx version.Please help with a link to the firmware.

Tags (1)
0 Kudos
5 Replies
GabiE-Xerox
Xerox Employee
Xerox Employee

Re: Altalink C8030 doesn't load

Jump to solution

Hi,

Unfortunately it will not working any firmware. It could be the SD card damaged or in the worst case the SBC PWB (Main Board).

 

Gabi

AlexanderGur13
New Member
New Member

Re: Altalink C8030 doesn't load

Jump to solution

I understand that. The SD card is ordered, although this one is also readable. Maybe there is an image of an SD card ?

0 Kudos
GabiE-Xerox
Xerox Employee
Xerox Employee

Re: Altalink C8030 doesn't load

Jump to solution

If you have another working machine, you can clone it.

AlexanderGur13
New Member
New Member

Re: Altalink C8030 doesn't load

Jump to solution

understand that. But there is no second such device. There is a similar topic on this forum, only there is Altalink C8035 with the same problem and everything was solved by filling the firmware 100. xxx. Do you not have this firmware version ?

0 Kudos
AlexanderGur13
New Member
New Member

Re: Altalink C8030 doesn't load

Jump to solution

The problem was solved by replacing SBC PWB and altboot FORCED_UPGRADE in this way. With a native SD card.