Altalink C8030 doesn't load

[AlexanderGur13 · Accepted solution]

The problem was solved by replacing SBC PWB and altboot FORCED_UPGRADE in this way. With a native SD card.

[AlexanderGur13]

understand that. But there is no second such device. There is a similar topic on this forum, only there is Altalink C8035 with the same problem and everything was solved by filling the firmware 100. xxx. Do you not have this firmware version ?

[GabiE-Xerox]

If you have another working machine, you can clone it.

[AlexanderGur13]

I understand that. The SD card is ordered, although this one is also readable. Maybe there is an image of an SD card ?

[GabiE-Xerox]

Hi,

Unfortunately it will not working any firmware. It could be the SD card damaged or in the worst case the SBC PWB (Main Board).

Gabi

[AlexanderGur13]

Hello. After a power outage in the room, the Xerox Altalink C8030 does not load further than the first screen saver.(post code 5). I want to make an Altboot firmware, but I can't find the 100. xxx version.Please help with a link to the firmware.