[B210 Printer] Enabling network access

[Tim bergman]

You are looking 4 this documention, thnk me later :)

http://download.support.xerox.com/pub/docs/B210/userdocs/any-os/ar/installation_guide.pdf

[ppicard]

Hello,

I have recently purchased 3 and this setup is ridiculous.

This process is done on a Windows based system.

In order to enable networking on the unit, you need to install the drivers and the printer locally to a system via USB. Then once installed, you open the Xerox Easy Printer Manager software. Choose the printer, then click on 'advanced settings' then click on 'device settings' then I believe it is networking (I don't have one plugged in at the moment to test). You can enable the wired or wireless connection from there. Save then plug in network cable.

Also, as an FYI, banner pages is on by default and needs to be disabled via the web interface. Again, a pain having to turn off.

Hope this helps.

[CherylO-Xerox]

Hi fdruel,

Thank you for using the Support Forum. Please take a look at the User Guide for network setup beginning on page 43.  If this does not help please consider contacting your support centre for further assistance.

[fdruel]

Hello all,

I just received a Xerox B210 Printer. After intalling the machine , I noticed that it did not connect to my Lan. 

I printed the info page and I noticed the ethernet card is disabled and that the Wifi direct service is disabled, too. 

My question : how can I enable the ethernet access ? 

Thanks for your help

François