Sorry to hear about your prob.
I responded with my experience, but then got a message to say that my post had been removed by a moderator as it was considered to be spam.
Hi Mike, did not find any other resolution other than using Apple Preview to open the pdf instead of Acrobat Reader. At least with this one it consistently works. G.
Thanks! I will try to remember that. So far I have had a good run of successful printing .... as long as I give it plenty of time to 'wake up' after powering down.
I searched our online knowledge base and found an article on how to connect a printer to a wired connection.
I just bought a B210 printer and it doesn't connect to the network. After following the instructions the software cannot find the printer. In this link you provided, where it says to enter the the IP address in your browser, the instructions dry up when it doesn't find the printer. If it doesn't work, your software directs me here and I don't see any solutions.
I have a window 10 Pro Box on an ethernet network. Can sopsme one email me the instructions on how to get the printer installed on a ethernet netwrok. Speciaficcally what to do if the software cannot find the printer. I have tried it with the firewall on and off. I have restarted the printer numerous times. I have tried an automatic setup. I have tried entering the IP address manually. It is setting the printer on a different subnet mask than my network. Where do I changes the subnet mask? The IP address it has selected is 169.254.nnn.nnn. My network is 192.168.0.nnn
Thanks for your help