Hi My Printer by pass tray feeding up double or Multiple page
the Plate under the paper picking roller is going up and down again and again.
Hi,
It looks like to be a mechanical problem (stuck solenoid).
Gabi
Hi,
Sorry! It is not about a solenoid, it is a clutch. It is located under the left side cover and in the picture below is formed from 17, 18 and 19 parts
Here you will find the service manual. It is possible to need to replace the Bypass Feed Assembly (part no. 050N00520), the clutch it is not spared separately. But try to disassemble to see if you can repair it.
Hi I share the vedio of My By Pass tray plz watch it and tell why the tray is up and downing continuosly
As I said, I think there is a problem with the bypass feed clutch which is probably broken and must be replaced.
Hi! Finally i have fix it now it's working really well