cancel
Showing results for 
Search instead for 
Did you mean: 
RandyD Frequent Member
Frequent Member

C60 & Booklet Maker Finisher Capabilties (North America)

My spec brochure for the Booklet Maker Finisher states the maximum 25 sheet / 100 imposed page on 20 lb / 75 gsm media. Is there a list anywhere that states these values for all the various paper weights / types and combinations that can be saddle-stitched?

 

I was testing a 68 page document and wanted to print it to 80 lb text coated but my C60 wouldn't print it unless I changed the paper settings to Plain [80 - 90 gsm].

 

It would be handy to have a list readily at hand to know which combinations weights I could print at a glance.

Randy Devost | Wearer of many hats :)
0 Kudos
5 Replies
Analyst Nation Moderator Joe053204-xrx
Analyst Nation Moderator

Re: C60 & Booklet Maker Finisher Capabilties (North America)

The Booklet Tray will handle up to 20 sets of a maximum of 25 uncoated sheets (20lb

75gsm)/20 sets of a maximum 20 uncoated sheets (24lb 90gsm). The Booklet Tray

will also handle10 coated/uncoated stapled sheets per set at 106 - 176 gsm/ 5 uncoated stapled sheets per set at 177-220 gsm, and can accommodate up to 13”x18” / SRA3 media. (Note: larger media will

result in reduced output tray capacity).

 

Your job would be 17 sheets coated 180GSM which is nowhere even close to specs for folding. Even without the Gloss/Coated you would be sitting around 5 folded sheets.

 

 

WARNING, THE FOLLOWING IS OLD DATA FROM THE PREVIOUS GENERATION OF FINISHER. THE NUMBERS MAY NOT BE IDENTICAL SO TAKE THE WHOLE TABLE WITH A GRAIN OF SALT. EVERYTHING FROM HERE ON MAY BE INCORRECT, BUT THE DOCUMENTATION OF YESTERYEAR IS VASTLY BETTER TO LOOK AT ;-)

 

Capture.GIF

 

I actually used to print that chart and tape it down right on the top of our D series finishers so I always could find it. As far as I know, no such chart is available for the new series of finisher.

 

Please be sure to select "Accept Solution" and or select the thumbs up icon to enter Kudos for posts that resolve your issues. Your feedback counts!

Joe.
0 Kudos
Mikefrompittsford Frequent Member
Frequent Member

Re: C60 & Booklet Maker Finisher Capabilties (North America)

Good morning,  Any chance you have a "capabilities" sheet for a professioinal finisher hooked up to a dc250?

 

Thanks!

0 Kudos
Analyst Nation Moderator Joe053204-xrx
Analyst Nation Moderator

Re: C60 & Booklet Maker Finisher Capabilties (North America)

The table above is for the D series finisher that was sold with the 250, it was also sold with the 260/560/700/770/C75/4110/4127/459X product families and more (Finishers don't really require much for advancement so they stay current for multiple generations.

Please be sure to select "Accept Solution" and or select the thumbs up icon to enter Kudos for posts that resolve your issues. Your feedback counts!

Joe.
0 Kudos
Analyst Nation Moderator Joe053204-xrx
Analyst Nation Moderator

Re: C60 & Booklet Maker Finisher Capabilties (North America)

Here is the DC240/250 CED as supplied with the devices back in ye olde 2007

Please be sure to select "Accept Solution" and or select the thumbs up icon to enter Kudos for posts that resolve your issues. Your feedback counts!

Joe.
Highlighted
Mikefrompittsford Frequent Member
Frequent Member

Re: C60 & Booklet Maker Finisher Capabilties (North America)

Thank you!

0 Kudos