cancel
Showing results for 
Search instead for 
Did you mean: 
1 Reply
CherylO-Xerox
Valued Advisor
Valued Advisor

Re: Copycentre 35 fuser wont heat up

Hi dexterp19,

Thank you for using the Support Forum. Please consider contacting your support centre for further assistance.

Thanks,
CherylO-Xerox
Community Manager

Be sure to click Kudos for those who have helped you.
Select Accept as Solution for posts that have helped to solve your issue(s)!

0 Kudos
dexterp19
New Member
New Member

Copycentre 35 fuser wont heat up

Product Name: Other - specify product in post

I have a copycentre 35, it errors with a fuser warmup message, i replaced the fuser and no change, had the old one looked at and it works fine.  Is there something i must do or not doing. Also i took the back cover off and checked for voltage from the fuser power connector and read nothing.  I checked for loosed connections and also blew all dust and toner out of the machine.  I jimmy rigged a cable to power up the fuser and the machine started working once it reached operating temperature.  Once i unplugged it, it failed again, my thoughts is the power supply, im optimistic and desparate for help seeing that this is our church's copy machine and im the local tech.

0 Kudos