cancel
Showing results for 
Search instead for 
Did you mean: 
Highlighted
New Member
New Member

Copycentre C2128 start-up problems

Hi all, Hope somone can help.

I have a C2128 copycentre machine that will not power up.

When I plug it in, the main power supply boots up at the rear and on the control panel at the front I have two flashing lights. One is the features light and the other is the job staus light. When I hold down the start button for the 5 seconds, the machine starts to make noise as if its about to start up but nothing shows up on the control panel screen. This machine is not connected to any PC or network.

Any help on this would be great.

 

Thank you

 

Dom

0 Kudos
1 Reply
Highlighted
Community Manager
Community Manager

Re: Copycentre C2128 start-up problems

Hi doneoneblade,

Thank you for using the Support Forum. Please take a look at the solutions for Machine will not power on.  Make sure to plug the machine directly into the outlet, no extension cords or surge protectors just to test.  If the problem continues please consider contacting your support centre for further assistance.

Thanks,
CherylO-Xerox
Community Manager

Be sure to click Kudos for those who have helped you.
Select Accept as Solution for posts that have helped to solve your issue(s)!

0 Kudos