where are these located? Registration assembly connectors.
077-220 Side Shift home Fail.
It is a fault from an sesor or from the shifting mechanism (motor or gears) of the Registration assembly. It is located in front of Registration under the metal cover and control the shifting of registration roll
Well it never happened again but that one time
We just shut it off, or I think it migth of restarted. Then we shut it off shut off main power, turn it back on and it's good to go
Still have the 077-220 error though
That just don't seem to be going anywhere
077-326 Regi NIP Fail. No output is made from Regi NIP Release Home SNR within specified time from the start of Regi NIP Release Mot operation
Take a look at the Registration assembly connectors.
Are you sure on that fault code/product? That FC is not listed in documentation for that product
Getting that error
we changed the roller in the BTR 2nd assembly unit because we were unable to get a full unit
Not getting error 077-326
The machien was on when we did it
we put the part back in
the machine came up then an error came up machine restarted then that error came up