Machine: FujiXerox DocuCentre-III C7600
Error Code: 094-320
Hi, i'm having trouble to fix my machine with the above error code. I've tried:
- Cleaning IBT Belt
- Cleaning First BTR Roller (but i'm not sure if that's the right BTR Roller)
- Cleaning IBT Belt sensor, both front and back sensor
- Turning 2nd BTR gear
- Initialized NVM on various variables (eg: IOT, sys-user and ETC)
However, the error code (094-320) still showing. Can any kind expert please help me with this. Highly appreciate. If you need any photo, please let me know. Thanks so much
Solved! Go to Solution.
You will need a tech because there is a mechanical problem inside the IBT assy (1st BTR retract failure).
The MCU and IOT PWB are electronic board and you can verify them just if you have another one's for replacement.
But I am sure your issue is from the IBT assy. I had a few with this fault code (with broken linkage or retract system blocked)
The IBT assy can be repaired, but by the tech. There is a innovator kit ( 655N00458 ) that can be fitted inside the IBT, also other tips. But, first visually must be inspected to see what part is broken or deformed. The 1st BTR's are the 4 roll which are the same from rubber/sponge. Verify the movement of the mechanism that moves the 1st BTR's.