I am trying to install an Integrated Office Finisher NFN-1 (097s04123) on my 7556 and have found out different informations online.
The official Xerox page mentions that the finisher would be compatible with the 75 series including the 7556 yet on some other web sites I see restrictions to copier up to 35ppm.
Can anyone confirm if this finisher would work on my machine ?
I did a clean install and a factory upgrade to the latest firmware however I keep getting this error :
|12-521-00||Finisher error. User intervention is required to Power Off/On the machine; service is required if the problem persists. Print and Copy services are disabled.||Trained|
Here is my configuration :
Machine Name: workcenter7556
System Software Version: 061.121.226.12400
Machine Hardware :
Net Controller RAM: 2048MB
Net Controller Disk Size: used=1891MB/total=160041MB
Finisher Type: Integrated Office Finisher
Finisher Punch: Not Present
Finisher Folder: Not Present
I have extensively tried to google this question but couldn't find anything precise so any help will be highly appreciated.
Solved! Go to Solution.
It will not, from the Official documentation it appears to not be available on the 7545/7556 models.
Also, the specs page doesn't list it for those 2 models either, but does for the lower speeds.
7535 has it
7556 does not