cancel
Showing results for 
Search instead for 
Did you mean: 
Highlighted
New Member
New Member

LED Failure

Product Name: Phaser 7500DN
Operating System: Windows 10

Two problems:

Faint black lines are printing on paper, when comapred to 'Repeating Defects' troubleshooint guide for print quality, they match 95mm which indicates a problem with either Fuser or Imaging Unit.

When printing 'Fault History', printing has LED failures 61-373, and Fuser Failure 10-338.

This printer is older, is it worth repairing and can the LED be repaired, thank you,

Hylon

0 Kudos
3 Replies
Highlighted
Valued Advisor
Valued Advisor

Re: LED Failure

Hi,

The LED cannot be repaired. Part no. for a new one is 130K72653.

 

Gabi

New Member
New Member

Re: LED Failure

Hello Gabi,

Thank you for the reply.

The fuser and imaging units are at 50% life remaining.

Can you give me an idea which one might be causing the faint black line every 95mm?

 

Thank you,

Hylon

0 Kudos
Highlighted
Valued Advisor
Valued Advisor

Re: LED Failure

Hi Hylon,

Try to swap the drum carridges between them to see if the defect is moving to other color.

 

 

 

0 Kudos